Serving Littleton, Sheridan, Englewood & The Denver Metro
Make sure your firearm is ready when you need it! Our gunsmiths can have you ready for hunting season and for everyday use. A thorough strip cleaning should be done once a year at least to ensure the proper function of your firearm.
Call or stop by Gunsmith At Large today!
Clean and Oil
The difference between a broken gun and a working gun is often just a good cleaning. We can clean, oil, inspect and test fire if necessary your firearms to make sure that they are ready for your next hunt or range day. Prices start at $60
General Firearm Repair
Gunsmith At Large offers general rifle repair and both OEM and aftermarket parts replacement and fitting. Broken Part? Lost spring? Gunsmith At Large can order thousands of brand name parts both OEM and aftermarket performance upgrade parts.
Rifle Machining (Drilling, Tapping, Threading, Etc.)
Gunsmith At Large offers a wide variety of services related to rifle machining. Barrel threading for suppressors or muzzle breaks, Drilling and tapping for a rail or scope base or even building a precision rifle from scratch. Barrel threading starts at $125.
Rifle Trigger Work
A customized trigger system allows for less creep, a more defined trigger squeeze and a lighter trigger pull. All of which will increase accuracy and ease of use. This is a must have for serious shooters, or for newer shooters looking to up their game.
Install Aftermarket Triggers
While a customized trigger can give your rifle that truly custom feel, sometimes you need more than can be offered from modifying a factory trigger. We have experience with triggers from a variety of manufacturers for both rifles and pistols and these can be installed sometimes while you wait.
Rifle Reface and Crown Barrel
Barrel Crowning might be one of the best things one can do to improve accuracy. A perfectly crowned rifle barrel diverts gases in an even manor and leaves a clean surface for the bullet to exit from. For as little as $60 we machine the style of crown that will give your gun the best performance.
Rifle Install Tactical Bolt Knob
Tactical style Bolt Handles give the shooter a much quicker follow up shot with a larger grip area, better ergonomics and ease of location without leaving the scope.
Rifle Perform Chamber Cast
A chamber casting is a great way to find out a caliber of non-marked barrels, throat lengths, military rifles calibers and reloading data to be obtained. Gunsmith At Large uses Cerrosafe to perform chamber castings.
Rifle Recoil Pad Installation (Does not include custom length)
No Matter the reason you are adding or replacing a recoil pad, done properly the new pad will fit clean and flush. The stocks heel and toe will meet the new recoil pad with a tight flush finish where the base of the pad’s lines are uninterrupted and the pad will look as an extension of the stock. Gunsmith At Large installs hundreds of recoil pads per year for as little as $60 plus the cost of the pad.
Rifle Glass Bedding of Action
As the foundation for accuracy in your rifle, Glass Bedding works by relieving the stress or flex of an action in the stock & minimizes the movement of an action within the stock. For $125 this is the most economical way to accurize your rifle.
Rifle Free Float Barrel Channel
Free floating the barrel channel can greatly improve accuracy by allowing the barrel to stay concentric with the action without pressure from the stock. Free floating allows the barrel’s natural harmonics to take place while firing without obstruction from the stock or other parts.
Don’t see what you are looking for? Give us a call. We offer stock and metal refinishing, re-blueing, and almost any service you can think of.